2. Select File > Open. Locate and Open the appropriate template.
NOTE: CorelDraw« Templates will have an .CDR extension.
VCR Sleeve Slippage
If you are printing video sleeves using the USVCRVS template, you may notice that the printout isn't exactly lining up with the VCR Sleeve
paper stock. To correct this, a slippage gauge is printed on every sleeve.
To adjust the printout, please do the following:
1. Print out a blank template on one of the VCR Sleeves
This will not waste your VCR Sleeve, the printout will be on a non
usable area
2. Open the Object Manager
Layout > Object Manager
3. You'll find a series of icons, click on the pencil icon for all the layers
These icons control the layer's basic properties. The pencil icon controls whether you can edit the layer's contents
4. Select Edit > Select All > Objects
This will select the entire template
5. Select Arrange > Transform > Position
This will enable you to adjust the position of the template
6. Make sure there is check mark in "Relative to Position"
This will move the template in respect to it's current position
7. Look at the printed VCR Sleeve (step 1).
The printout will line up to a number on the milimeter scale
8. Enter the number into the H (horizontal) section in the Position window
9. Click on Apply
This will apply the changes to the template
10. Click on the pencil icon for all the layers, except the "Work Area"
This will deselect all the background layers, preventing you from inadvertantly modifying the template
11. Resume your printing
Your template should now be correctly calibrated for any slippage that may have occurred with your printer
PLEASE REFER TO YOUR CORELDRAW« MANUAL FOR ANY APPLICATION INSTRUCTIONS.
IMPORTANT NOTE:
Before you pick a template, make sure you know which paper stock you will be printing to! If you have standard US letter size stock (8 1/2 x 11), pick a template from the US list. If you have European/Asian A4 size stock (210mm x 297mm), pick a template from the A4 list. IF YOU CHOOSE THE WRONG TEMPLATE FOR YOUR STOCK, YOUR PRINTOUT WILL NOT LINE UP CORRECTLY!
Templates for A4 (European/Asian) paper stock
A4AUDj_b Audio J-Cards (back) template
A4AUDj_f Audio J-Cards (front) template
A4AUDlbl Labels for Audio cassette
A4CD2lbl CD labels with 2 CD's per page
A4CD2LBL_FC Full Coverage CD labels with 2 CD's per page
A4CDenv Print & File (CD Envelopes)
A4DATj_b J-Cards for 4mm DAT tapes (back)
A4DATj_f Face/spine labels and J-Cards for 4mm DAT tapes
A4DATlbl Face/spine labels and J-Cards for 4mm DAT tapes
A4FLOPPY Labels for 3.5" floppy disc
A4HCD63 Labels for 80 X 63 mm Handi CDs
A4JAZins iomega JAZ(c) inserts
A4JAZlbl Labels for iomega JAZ(c) cartridges
A4JCbook Jewel case front booklet
A4JCtray Jewel case rear tray liner insert
A4JCSLIM Slimline Jewel Case Insert
A4MDlbl Labels for MiniDiscs
A4MOj_b J-Cards for Magneto Optical (back)
A4MOj_f J-Cards for Magneto Optical (front)
A4MOlbl Labels for Magneto Optical discs
A4PNFSCD 80 X 63 mm Handi CD Sleeves
A4SDinsb SuperDisk(tm) Inserts (back)
A4SDinsf SuperDisk(tm) Inserts (front)
A4SDlbl SuperDisk(tm) labels
A4VCRins Inserts for VCR tape cases
**This template may not work with all styles of VCR tape cases**
A4VCRlbl Labels for VCR Face/Spine
A4ZIPj_b iomega ZIP(c) J-Cards (back)
A4ZIPj_f iomega ZIP(c) J-Cards (front)
A4ZIPlbl Labels for iomega ZIP(c) cartridges
Templates for US size (8 1/2 x 11 inch) paper stock
USAUDj_b Audio J-Cards (back) template
USAUDj_f Audio J-Cards (front) template
USAUDlbl Labels for Audio cassette
USCD2lbl CD labels with 2 CD's per page
USCD2LBL_FC Full Coverage CD labels with 2 CD's per page
USCD3lbl CD labels with 3 CD's per page
USCDenv Print & File (CD Envelopes)
USDATj_b J-Cards for 4mm DAT tapes (back)
USDATj_f Face/spine labels and J-Cards for 4mm DAT tapes
USDATlbl Face/spine labels and J-Cards for 4mm DAT tapes
USFLOPPY Labels for 3.5" floppy disc
USHCD63 Labels for 80 X 63 mm Handi CDs
USJAZins iomega JAZ(c) inserts
USJAZlbl Labels for iomega JAZ(c) cartridges
USJCbook Jewel case front booklet
USJCSLIM Slimline Jewel Case Insert
USJCtray Jewel case rear tray liner insert
USMDlbl Labels for MiniDiscs
USMOj_b J-Cards for Magneto Optical (back)
USMOj_f J-Cards for Magneto Optical (front)
USMOlbl Labels for Magneto Optical discs
USPNFSCD 80 X 63 mm Handi CD Sleeves
USSDinsb SuperDisk(tm) Inserts (back)
USSDinsf SuperDisk(tm) Inserts (front)
USSDlbl SuperDisk(tm) labels
USVCRins Inserts for VCR tape cases
**This template may not work with all styles of VCR tape cases**
